TEL : +44 (0) 121 522 2221
FAX : +44 (0) 121 557 6861
Home | Contact | Where to find us | Special Offers
Oil and Grease Dispensers
AIR OPERATED DISPENSING VALVES
Metering Technology Accurate control for grease and oil
Dispensing valves supply the right amount of lubricant in the right place at the right time.
Designed for assembly line applications, these valves are operated at any angle by compressed air.
They are lightweight and compact for ease of use.
Pre-set volumes of between 0.05 cm³ and 133 cm³ (up to 500 cm³ to special order) can be repeatedly dispensed with an accuracy of less than ±10%.
Greases from NLGI grade OOO to NLGI grade 3 can be handled. They can also be used with oils.
Accurate dispensing means clean and efficient lubrication. Cleanliness equals quality.
Hand Held Dispensers

Horizontal Model

With integral 5/2 way
solenoid valve. Can
be used with cable
balancer.

41926.10 - 0.05 to 0.45cm³
41956.10 - 0.2 to 2.0cm³
41961.10 - 1.0 to 6.0cm³

Vertical Model

With integral 5/2 way
solenoid valve.
For vertically accessible
lubrication points.
Use with a cable balancer.

41926.20 - 0.05 to 0.45cm³
41956.20 - 0.2 to 2.0cm³
41961.20 - 1.0 to 6.0cm³
Bench Mounted Dispensers

With support bracket for
bench mounting or
installation on assembly
lines. Special support
brackets or multiple brackets can be supplied on request.

41922 - 0.005 to 0.100cm³
41927 - 0.05 to 0.45cm³
41957 - 0.2 to 2.0cm³
41962 - 1.0 to 6.0cm³

For bench mounting or
installation on assembly lines.

41965 - 2.0 to 26.0cm³
41970 - 5.0 to 54.0cm³
41975 - 10 to 133 cm³

Designed to supply small
volumes of grease.
Model 41990 is for bulk fill,
41991 is for standard
400 cm³ cartridges.

41990 - 0.05 to 1.4 cm³
41991 - 0.05 to 1.4 cm³
Unless specified a separate 5/2 way solenoid valve is required to operate the dispensers. Details of the pneumatic grease pumps suitable for use with these dispensers are available on request.